Loading
Acoustimass® 6 Series II home cinema speaker system | Configurer votre produit

Acoustimass® 6 Series II home cinema speaker system | Configurer votre produit

To connect the components of your system:

  1. On the audio input cable, connect each labeled wire pair to the corresponding jacks on the receiver
    Tip: Be sure to match the + to - markings on the wire pairs to the corresponding terminals on the receiver
  2. Connect the plugs at the end of the input cable to the INPUT FROM RECEIVER OR AMPLIFIER jacks on the bass module
    (Tip: The black plugs connect to the L and R jacks; the gray plugs connect to the C, LS, and RS jacks)
  3. Connect the speaker cables from each speaker to the OUTPUTS TO CUBE SPEAKERS jacks on the bass module

Déterminez où placer votre produit.

Pour des suggestions de positionnement des haut-parleurs, voir positionnement et positionnementdes haut-parleurs .

Paramètres du récepteur

Dans les paramètres du récepteur, recherchez les paramètres ci-dessous. Si elles sont disponibles, placez-les comme illustré.
  • Taille des haut-parleurs avant gauche/droite : Grand
  • Taille du haut-parleur central : Petit
  • Taille du haut-parleur arrière gauche/droit : Grand
  • Sous-titre : Désactivé
  • LFE : activée
  • Fréquence de croisement : 200 Hz

Cette information est-elle utile?

OUI
NON
COMMENCER LA RÉPARATION OU LE REMPLACEMENT
Chargement
Acoustimass® 6 Series II home cinema speaker system | Configurer votre produit