Was this helpful?
Understanding the tones from your product | Bose Bluetooth headset
Understanding the tones from your product
| Tone Description | Tone Indication |
|---|---|
| Single beep | Incoming call answered or voice dialing activated |
| Single beep per press. Tone changes when upper or lower volume limit is reached | Volume adjustment |
| Short double beep (descending). Repeats every 30 seconds | Call muted |
| Short double beep (ascending) | Call unmuted |
| Single long beep* | Pairing mode started |
| Two notes (descending)* | Incoming call |
| Two quick notes (descending) | Call ended or incoming call rejected. Headsets with software less than 01.04 do not play the end call tone |
| Three quick notes (ascending) | Bluetooth device connected |
| Three quick notes (descending)* | Bluetooth device disconnected |
| Four notes (ascending) | Headset turning on |
| Four notes (descending) | Headset turning off |
| Five-note warble. Repeats every 2 minutes. Incorrectly described as a "low beep" on page 11 of the owner's guide | Low battery |
| Old-style phone ringing* | Redialing last number |
*Not mentioned in the owner's guide