Loading
Connecting to power | CineMate® 10 home theater system
cinemate®-10-home-theater-system
CineMate® 10 home theater systemSold from 2014 - 2016

Connecting to power | CineMate® 10 home theater system

Attach the Acoustimass module power cord.

The power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to its jack on the Acoustimass module. Be sure it is firmly seated
  2. Connect the two prong plug at the other end of the power cord to a working power outlet
Note: If the Acoustimass module is a dual voltage module, set the switch to the proper voltage.
Loading
Connecting to power | CineMate® 10 home theater system