Loading
Understanding LED indicator status lights and information | CineMate® 10 home theater system
cinemate®-10-home-theater-system
CineMate® 10 home theater systemSold from 2014 - 2016

Understanding LED indicator status lights and information | CineMate® 10 home theater system

CineMate 10 and CineMate 15 Soundbar Status Indicators

LED StateDescription
OffThe system is off or is not connected to power
OnThe system is on
Steady BlinkingThe system is muted
1 BlinkA command was received from the remote control
2 BlinksThe maximum or minimum volume threshold has been reached. If a volume button is being held down, this pattern will repeat.
3 BlinksAuto-sleep feature has been disabled/enabled
10 BlinksThe system has just been connected to power
4 Blinks RepeatingThis shows in Diagnostic Mode (after holding Mute for 15 seconds, then releasing) if the system does not detect an input signal
2 Blinks RepeatingThis shows in Diagnostic Mode (after holding Mute for 15 seconds, then releasing) if the system has detected an input signal
Loading
Understanding LED indicator status lights and information | CineMate® 10 home theater system