Loading
Connecting to power | CineMate® 130 home theater system
cinemate®-130-home-theater-system
CineMate® 130 home theater systemSold from 2014 - 2015

Connecting to power | CineMate® 130 home theater system

Attach the control console power cord.

The power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to the Power connector on the control console. Be sure it is firmly seated
  2. Connect the two prong plug of the power cord to a working power outlet

Attach the speaker array power cord.

The speaker array power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to its jack on the speaker array. Be sure it is firmly seated
  2. Connect the two-prong plug at the other end of the power cord to a working power outlet

Attach the Acoustimass module power cord.

The power cord is detachable. To attach the power cord, follow these steps:
  1. Connect the molded end of the power cord to its jack on the Acoustimass module. Be sure it is firmly seated
  2. Connect the two prong plug at the other end of the power cord to a working power outlet
Note: If the Acoustimass module is dual voltage, set the switch to the proper voltage.
Loading
Connecting to power | CineMate® 130 home theater system