Loading
Wave® multi-CD changer | Setting up your product
wave®-multi-cd-changer
Wave® multi-CD changer

Wave® multi-CD changer | Setting up your product

To connect the components of your system:

Before you begin

Insert the update disc provided with your product, then wait for the update to complete. If you do not have an update disc, check that the software on your Wave music system is 010400 or higher. If it is, no update is necessary. For more info, see Checking the software or firmware version.

Connecting your system

  1. On the back of your Wave music system, unplug the power cord.
  2. Set the Wave music system on top of the multi-CD changer so the top and bottom units are aligned.
  3. On the back of the multi-CD changer, connect the Bose Link cable to the Bose Link connection on the Wave music system.
  4. On the back of the multi-CD changer, connect the power cable to the AC Power jack on the Wave music system.
  5. Connect the power cord you disconnected in step 1 to the AC Power jack on the multi-CD changer.
  6. Connect the other end of the power cord to an AC (mains) outlet.
Loading
Wave® multi-CD changer | Setting up your product