Enabling or disabling Party or Stereo mode | Bose SoundLink Revolve II Bluetooth Speaker

Sold from 2021

Enabling or disabling Party or Stereo mode | Bose SoundLink Revolve II Bluetooth Speaker

How will you enter Party or Stereo mode?

Using the speaker buttons

Turn on both speakers you want to play
Connect one of the two speakers to your Bluetooth® device
On the speaker connected to your device, simultaneously press and hold the Bluetooth and Volume + buttons until you hear a voice prompt
On the second speaker, simultaneously press and hold the Bluetooth and Volume – buttons until you hear a tone.

After about 10 seconds, a voice prompt announces "Party mode" from both speakers.

Put the two speakers you want to play in Party mode using the instructions above
Once in Party mode, you can switch to stereo mode:
- On one of the speakers, simultaneously press and hold the Bluetooth and Volume + buttons until a voice prompt announces "Stereo mode"
- You'll hear "Left" from the left speaker and "Right" from the right speaker

To switch between Party and Stereo mode, simultaneously press and hold the Bluetooth and Volume + buttons.

To unlink your speakers, press and hold the Bluetooth button until you hear a voice prompt, or just power off one of the speakers.

Using the Bose Connect app

Power on both speakers you want to play
Pair at least one of the two speakers with your Bluetooth device
Open the Bose Connect app and tap the Party mode icon toward the bottom
If you have more than one Bose Bluetooth product, swipe left of right to find the one you want, then tap the Party mode icon
Tap CONTINUE and wait for your speakers to connect

If this doesn't work, visit btu.bose.com to check for and install any available updates for your speakers.

Put your speakers in Party mode using the instructions above
Once in Party mode, you can switch to Stereo mode by tapping the STEREO (L/R) toggle at the bottom of the app
Tapping STEREO (L/R) again will switch back to Party mode.

If this doesn't work, visit btu.bose.com to check for and install any available updates for your speakers.

To switch between Party and Stereo mode, tap the STEREO (L/R) toggle at the bottom of the app

To unlink your speakers, tap the X on the image of the speaker you want to disconnect, or just power off one of the speakers.

Was this helpful?