Bose® Solo 15 Series II TV sound system – Factory Renewed | Programming your remote

Sold from 2015 - 2017

Bose® Solo 15 Series II TV sound system – Factory Renewed | Programming your remote

There is a Youtube video for these instructions.

Some brands have many devices, so you might need to try several codes to find one that works
If the source button on your remote turns off, it is not in programming mode. Start the programming process again
While your univeral remote can control many devices, it might not be able to control or fully control all devices

In the remote control code booklet included with your system, find the code for the brand you want to control
Tip: If you need the code booklet, search for and select your product at support.bose.com, then click the Downloads tab
On your remote, press and hold the source button of the device you want to control (i.e. TV or CBL-SAT) until all six source buttons glow
Release the button so only the button you held glows
Enter the code for the device brand, then press the Volume + button
Tip: If all six source buttons blink three times, an invalid code was entered
Check if the remote controls the device:
- For TVs, try the Channel buttons, then press Menu and try browsing with the Arrow buttons
- For cable/satellite boxes, press the Guide button and try browsing with the Arrow buttons
- For DVD/Bu-ray players, press the Menu or Guide button and try browsing with the Arrow buttons
- For game systems, try browsing with the Arrow buttons
If the code works, press Exit to save your settings
If the code does not work, press Volume + to select the next code for the brand, then repeat step 5
Tip: If the six source buttons on your remote blink three times, there are no additional codes for the brand.

Was this helpful?