Was this helpful?
Programming your remote | 3·2·1® GSX Series III DVD home entertainment system
Use the remote code lookup tool to find a compatible code for the device.
The Remote Code Lookup Tool allows for users to search for a compatible device code based on the device type, brand and model number entered. Use this tool to lookup compatible device codes only. Do not use the tool to submit new device codes for this product.
Note: Some codes found in this database may not be available. This tool was designed to list codes present in current Lifestyle systems only and should only be used as a rough guide.
Note: Some codes found in this database may not be available. This tool was designed to list codes present in current Lifestyle systems only and should only be used as a rough guide.
To program your remote:
- Power on the source device you want to control
- On the remote control, press and hold the source button of the device you want to control (TV, CBL-SAT or AUX) for about five seconds until the remote light glows
- Enter the source code: The remote light blinks after each digit is entered and turns off once fully entered. If an incorrect code is entered, the light blinks eight times and turns off. If this happens, wait 10 seconds, then try again
Tip: If you need the code booklet, search for and select your product at bose.com/support, then click the Downloads tab - Point the remote at the source and press the source On/Off button
Tip: If the On/Off button works, try other buttons. If you cannot control or cannot fully control the device, try a different code.
To set a TV channel control button on your remote:
- On the remote control, press and hold the Previous or Last button until the light on the remote glows, then blinks to show the current setting: one blink for TV (default setting); two blinks for CBL-SAT; three blinks for AUX
- Press the button you want to use to control TV channels (TV, CBL-SAT, or AUX). For example, if a cable box is connected to CBL-SAT on the system console, select CBL-SAT. Then, when you press the CBL-SAT button on the remote, you will hear cable sound and be able to change channels
- Press the Exit button to save the setting.
Information regarding Transport Controls.
Extended IR Database remote (button below key #9 labeled "Previous"):
- The transport controls (play,pause, stop, etc.) for this remote are modal. Transport controls work for the source that is selected using the remote
- The transport controls for this remote are not modal. Transport functions work for the device that is setup as AUX.
.png)
