Was this helpful?
Too much bass or too little treble from product | Virtually Invisible® 591 in-ceiling speakers
If the sound lacks treble or has too much bass:
Try the following:
Check if the issue is with both or one rear speaker.
Listen to both speakers to determine if the issue is with one or both rear speakers. If the issue is only with one speaker, see Quiet, intermittent or poor sound quality from one speaker.
Adjust bass and treble controls on the connected audio device.
Many devices have sound options, like bass and treble controls or compression. Check the device menu for sound processing options and disable them. If the issue is resolved, re-add only the necessary sound options. For adjustable options, try small adjustments.
Make sure the receiver's speaker settings are set properly.
Many receivers allow the owner to set the size of the speaker, set tone control, and whether a subwoofer (LFE) is present. For more information on setting the receiver properly, see your receiver's owner's guide
Be sure the speakers are connected properly to the receiver.
Check the speaker wire connections so they are wired properly and firmly to the positive and negative terminals. There should be no exposed wires as this risks damaging the receiver or tripping its circuit protection mode. Also, be sure the proper set of speaker terminals are being used; many receivers have an "A Speaker" and "B Speaker" section. See the receiver's owners guide for more information.
Check if your speaker placement follows the recommendations for your system.
The placement of the speaker within the area affects how your hear sound from the speakers. For more info, see Speaker placement and positioning.
.png)
