Was this article helpful?
ADAPTiQ system setup and deactivation | SoundTouch® Stereo JC series II Wi-Fi® music system
To run the ADAPTiQ audio calibration system:
Before you begin, be sure the speakers are connected placed where you want them.
- Plug in the ADAPTiQ headset to the Audio IN jacks on the Acoustimass module
- Put the ADAPTiQ headset on your head. (Tip: Be sure the L and R letters on the headset are above your left and right ears)
- Press and release the ADAPTiQ button on the Acoustimass module to start the calibration process. (Tip: Press the ADAPTiQ button to scroll through the available languages, then press the screen on the SoundTouch Controller to select a language)
- Stand the Acoustimass module on its feet (or as you will position it normally)
- Follow the voice prompts to calibrate your system
- Once complete, unplug the headset
To turn off the ADAPTiQ audio calibration:
On the bass module, press and hold the ADAPTiQ button for about 10 seconds until a message is heard from your speakers to confirm.
.png)
