Was this article helpful?
ADAPTiQ system setup and deactivation | Lifestyle® 38 Series IV DVD home entertainment system
To run the ADAPTiQ audio calibration system:
Before you begin, be sure the speakers are connected placed where you want them.
- On the system console, insert disc 1 of the ADAPTiQ audio calibration kit
- On the remote control, press the CD-DVD button
- When prompted, remove disc 1 and insert disc 2. (Tip: If the on-screen instructions do no appear on your TV, be sure the correct TV input is selected)
- When prompted, connect the ADAPTiQ headset to the Audio IN jacks in the AUX section on the back of the system console. (If a device is connected to AUX, disconnect it until calibration is complete)
- Put the ADAPTiQ headset on your head. (Tip: Be sure the L and R letters on the headset are above your left and right ears)
- Follow the on-screen instructions to complete calibration
To turn off the ADAPTiQ audio calibration:
Note: This process erases the current ADAPTiQ audio calibration settings. To enable ADAPTiQ after, insert the audio calibration disc included with your system.
- On the remote control, press the System button. (If the system menu does not appear on your TV, be sure the correct TV input is selected)
- Scroll right to Audio
- Scroll down to ADAPTiQ
- Scroll right and then up or down to select Erase
- On the system console, press the Erase button
.png)
