Was this helpful?
Too little bass or too much treble from product | F1 Model 812 Flexible Array loudspeaker
If the sound lacks bass or has too much treble:
Try the following:
Determine if the room dimensions are affecting the sound.
In larger rooms, audio might be heard differently (i.e. lower volume and bass response). If the issue is not heard in smaller rooms, different speaker placement and/or additional speakers might be needed for larger rooms.
Check the system's EQ switch:
- If using the F1 Model 812 without the F1 Subwoofer, make sure the 812's EQ switch isset to FULL RANGE
- If using the F1 Model 812 with the F1 Subwoofer, check to see if the Sub's POLARITY switch is set to NORMAL. If there is a fair amount distance between the Array and Sub, setting the POLARITY switch to REV may improve bass
- If using the F1 Model 812 with multiple F1 Subwoofers, make sure the POLARITY switch is in the same position on each subwoofer
Replace the input cables.
Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more information, see Resetting your product.
If using an external mixer, try adjusting the channel and/or master EQ controls.
If the issue is with audio sources plugged in to a mixer that is connected to your system, try adjusting channel or master EQ on the mixer. If the EQ is not set properly (i.e. too high or too low), it can affect how sound is heard from your system.
Plug in a different audio source.
Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.
.png)
