Loading
Acoustimass® 600 home cinema speaker system | Setting up your product
acoustimass®-600-home-theater-speaker-system
Acoustimass® 600 home theater speaker systemSold from 2000 - 2005

Acoustimass® 600 home cinema speaker system | Setting up your product

To connect the components of your system:

  1. On the audio input cable, connect each labeled wire pair to the corresponding jacks on the receiver
    Tip: Be sure to match the + to - markings on the wire pairs to the corresponding terminals on the receiver
  2. Connect the plugs at the end of the input cable to the INPUT FROM RECEIVER OR AMPLIFIER jacks on the bass module
    (Tip: The black plugs connect to the L and R jacks; the gray plugs connect to the C, LS, and RS jacks)
  3. Connect the speaker cables from each speaker to the OUTPUTS TO CUBE SPEAKERS jacks on the bass module

Determine where to place your product.

For speaker placement suggestions, see Speaker placement and positioning.
Loading
Acoustimass® 600 home cinema speaker system | Setting up your product