Loading
Lifestyle® 8 Series II System | Setting up your product
lifestyle®-8-series-ii-system
Lifestyle® 8 Series II SystemSold from 2000 - 2003

Lifestyle® 8 Series II System | Setting up your product

To connect the components of your system:

  1. Connect the RCA plugs of the audio input cable to the Fixed jacks on the system console
  2. Connect the 1/8" (3.5 mm) plug of the audio input cable to the System Control 1 jack on system console
  3. Connect the 13-pin plug of the audio input cable to the Audio Input jack on the bass module
  4. Connect the speaker cables from each speaker to the Outputs to Cube Speakers jacks on the bass module
  5. Connect the power cord from the bass module to an AC (mains) outlet
  6. Connect the power supply from the AC Power connection on the system console to an AC (mains) outlet

Determine where to place your product.

For speaker placement suggestions, see Speaker placement and positioning.

RC5 and RC9 Main Room Remote DIP Switch Settings

Switch LabelSettingSwitch Function
1Down*House code
2Down*House code
3Down*House code
4Down*House code
5UpSpeaker A
6DownSpeaker B
7DownNot used
8DownNot used
*Default setting shown. To modify the house code of the system, see Changing house code settings.

Using in-wall speaker wiring.

Note: Due to the variety of state and local building codes concerning in-wall wiring, the wiring supplied with Bose systems may or may not be acceptable for in-wall installations. Check local codes for details.

If your room has speaker wires installed in the walls, the accessory Adapter Kit for In-Wall Speaker Wires is available to connect to your existing speaker wires

Connect audio devices to your product.

For more info, see Connecting other devices to your system.

Was this helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Need Help?
Need further assistance? We’re here to help.
Loading
Lifestyle® 8 Series II System | Setting up your product