Loading
Attaching or moving the boom microphone on the headset | Bose Aviation Headset X
bose-aviation-headset-x
Aviation Headset XSold from 1998 - 2010

Attaching or moving the boom microphone on the headset | Bose Aviation Headset X

To reattach or relocate the boom microphone:

  1. On the microphone connector at the earcup, loosen the two screws using a flat-tipped screwdriver, then pull the connector from the earcup
  2. On the terminal cover at the other earcup, loosen the two screws, then pull the cover from the earcup
  3. Align the microphone connector to the desired earcup, then tighten the screws to secure it in place
  4. Align the terminal cover to the opposite earcup, then tighten the screws to secure it in place
  5. Test the headset before flight.

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Attaching or moving the boom microphone on the headset | Bose Aviation Headset X