Loading
ADAPTiQ system setup and deactivation | CineMate® 520 home theater system
cinemate®-520-home-theater-system
CineMate® 520 home theater systemSold from 2014 - 2015

ADAPTiQ system setup and deactivation | CineMate® 520 home theater system

Turn ADAPTiQ audio calibration on or off.

Before you begin, be sure all speakers are connected and placed where you want them.

To turn on ADAPTiQ, run the audio calibration:

  1. Put the ADAPTiQ headset on your head. (Tip: Be sure the L and R letters on the headset are above your left and right ears)
  2. Plug in the headset to the jack on the right side of the system console
  3. On the remote control, press System
  4. Press the down arrow to select 14 ADAPTiQ on the console display
  5. Press OK
  6. Follow the voice prompts to calibrate your system
  7. Once complete, unplug the headset

To turn off ADAPTiQ, restore the default system settings:

To turn off the ADAPTiQ audio calibration, restore the default settings of your system. For more info, see Resetting your product.
Loading
ADAPTiQ system setup and deactivation | CineMate® 520 home theater system