Was this helpful?
Lifestyle® 28 Series III DVD home entertainment system | "No Lifestyle Video Signal" message displayed on media center
Be sure both video connectors of the VS-2 Quadra Cable are connected to the "Video Out" connections on the media center.
Connecting S-Video and composite video connectors to the "Video In" connections will result in no video.Check the Video Resolution setting.
The VS-2 has the ability to up-scale the video signal to a higher quality. Check to see if changing this setting helps. For information on how to change the VS-2's video resolution, see Setting video resolution.Perform a media center with video enhancer reset, and reseat the VS-2 to media center connections.
During the media center reset process, while power is disconnected, reseat the VS-2 interconnect cable, serial data cable and video connections at the media center and VS-2 enhancer. For more information on how to reset the media center, see Resetting your productNote: A reset is used to correct occasional product issues. It is not something that a product should require repeatedly
Explain Service Options for the VS-2.
Determine the Warranty or Rapid Response status and see Service Options for the VS-2.Your media center may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.Click here to start service