Was this article helpful?
Resetting your product | Wave® music system IV
Reset your system.
To reset your system, disconnect the power cord for 30 seconds. If an accessory SoundLink or Bluetooth® adapter is connected, disconnect it from power as well. (Note: Some adapters do not require a separate power cord.)
If a CD is in the system, it will automatically eject when you reconnect power.
If a CD is in the system, it will automatically eject when you reconnect power.
Advanced Troubleshooting
If the standard reset does not resolve your issue, try the Factory Reset/Default
Restore Factory Settings
This resets your product to its factory default configuration. Unless indicated otherwise, all settings are cleared and reverted to their original out-of-box state. After, your product can be configured as if it were being setup for the first time.
Note: This reset erases all settings and returns your product to its default out-of-box state.
- Power off your product
- On the remote, press and hold the Alarm Setup button until -SETUP MENU- is displayed
- Press the Tune > button repeatedly until RESET ALL is displayed
- Press the Time + button to select YES
- While PRESS 3 TO CONFIRM appears on the system display, press the 3 button.