Was this helpful?
Resetting your product | T4S ToneMatch® mixer
Do you want to reset your product or restore its default settings?
- Reset: A reset corrects minor processors errors. Unless indicated otherwise, product settings are not lost during a reset.
- Restore factory settings: This resets your product to its factory default configuration. Unless indicated otherwise, all settings are cleared and reverted to their original out-of-box state. After, your product can be configured as if it were being setup for the first time.
Reset the ToneMatch mixer by following these steps:
- Turn the ToneMatch off using the power switch on the back of the unit.
- Unplug the power cord (This is the ethercon cable labeled with the ToneMatch symbol on the back of the mixer. Power is plugged in via the optional power supply or the ToneMatch audio cable connected to an L1 model II system).
- Wait 30 seconds.
- Reconnect the power cord.
To restore the factory default settings:
Note: This reset erases all settings and returns your product to its default out-of-box state.
- Power off your mixer
- Simultaneously press and hold the four Mute buttons on channels 1, 2, 3 and 4 and, while holding them, powering on your mixer
- When Factory Reset Please Wait appears on the display, release the Mute buttons
- Wait until Factory Reset Complete appears on the display before operating your mixer.
.png)
