Was this article helpful?
Resetting your product | SoundTouch® Stereo JC Wi-Fi® music system
Do you want to reset your product or restore its default settings?
Reset
Reset your Acoustimass module by following these steps:
- Turn the system off
- Unplug the Acoustimass module power cord from the power outlet
- Unplug the wireless adapter from the Acoustimass module.
- Wait 30 seconds
- Reconnect the wireless adapter to the Acoustimass module
- Reconnect the Acoustimass module power cord
Restore factory settings
To restore the factory default settings of the SoundTouch adapter:
Note: This reset erases all settings and returns your product to its default out-of-box state. Once reset, open the SoundTouch app to reconfigure your product.
- Turn on your system
- On the back of the system console, disconnect the SoundTouch adapter from the Bose link and USB jacks
- If connected, disconnect the Ethernet cable from the adapter
- On the back of the adapter, press and hold the Control button and, while holding it, reconnect the Bose link cable to the console
- When the light on the pedestal begins blinking white (about five seconds), release the Control button
- Reconnect the USB cable to the console
- Wait until the light on the adapter is solid amber. (Note: While resetting, the light will change colors and blink patterns for up to 4 minutes)
- If previously connected, reconnect the Ethernet cable
To restore the factory default settings:
Note: With the exception of the ADAPTiQ audio calibration settings, this reset erases all settings and returns your system to its default out-of-box state.
- Power off your system.
- On the back of the system console, disconnect the power cord.
- On the front of the system console, simultaneously press and hold the Source and the Volume - buttons and, while holding them, reconnect the power cord.
- Continue holding the buttons until the Bose logo appears twice on the TV screen.
- Re-pair the remote control with your system. For more info, see Pairing the remote control to your system.