Was this article helpful?
Resetting your product | T1 ToneMatch™ audio engine
Do you want to reset your product or restore its default settings?
- Reset: A reset corrects minor processors errors. Unless indicated otherwise, product settings are not lost during a reset.
- Restore factory settings: This resets your product to its factory default configuration. Unless indicated otherwise, all settings are cleared and reverted to their original out-of-box state. After, your product can be configured as if it were being setup for the first time.
Reset the ToneMatch mixer by following these steps:
- Turn the ToneMatch off using the power switch on the back of the unit.
- Unplug the power cord (This is the ethercon cable labeled with the ToneMatch symbol on the back of the mixer. Power is plugged in via the optional power supply or the ToneMatch audio cable connected to an L1 model II system).
- Wait 30 seconds.
- Reconnect the power cord.
To restore the factory default settings:
- Power on your ToneMatch mixer
- Rotate the main selector knob to Scenes
- Rotate the Select knob (the leftmost knob under the display) until Factory Settings is highlighted
- Press the Select knob to select this option, then again when prompted to confirm the action.
.png)
