Loading
Connecting to a mixer | L1® Compact portable line array
l1®-compact-portable-line-array
L1® Compact portable line arraySold from 2009 - 2021

Connecting to a mixer | L1® Compact portable line array

To connect an L1 Compact system to a mixing board, follow these steps:

If the instruments are connected to the mixing board first
  1. Connect each instrument to the mixing board
  2. Set each channel's input trim and level to the desired level
  3. Connect the "Main Output" of the mixing board to the Channel 2 input of the L1 Compact system
Note: The L1 Compact system is mono, so be sure the mixing board is not sending a stereo signal

If the instruments are connected to the L1 Compact system first
  1. Connect the instruments to the L1 system as normal. For information on connecting instruments to an L1 system, see Setting up your product
  2. Use either ? cable (TRS or TS) or stereo RCA cables
    To use a ? cable:
    1. Connect one end of a ? TRS or TS cable to the "Main" Line Outputs on the power stand
    2. Connect the other end of the ? cable to the desired channel's input on the mixing board
    To use stereo RCA cables:
    1. Connect one end of the stereo RCA cables to the "Record" Line Outputs on the power stand
    2. Connect the other end of the stereo RCA cables to the "Line In" inputs on the mixing board
Loading
Connecting to a mixer | L1® Compact portable line array