Was this article helpful?
Connecting to a mixer | L1® Model 1S system
To connect an L1 system to a mixing board, follow these steps:
If the instruments are connected to the mixing board first
- Connect each instrument to the mixing board
- Set each channel's input trim and level to the desired level
- Connect the "Main Outputs" of the mixing board to the "Input" of channel 1 and 2 on the L1 system
- Set each channel's preset to "00"
- Connect the instruments to the L1 system as normal. For information on connecting instruments to an L1 system, see Setting up your product
- Connect the male end of an XLR cable to the "Line Out" of the channels that are being sent to the mixing board. Only channels 1 and 2 have this output. Anything connected to channels 3 and 4 cannot be sent to the mixing board
- Connect the outputs of the L1 system into the "Line In" inputs on the mixing board
- Set the input trim and level of each channel on the mixing to the desired level
.png)
