Loading
Connecting to a mixer | L1™ Model II system
l1™--model-ii-system
L1™ Model II SystemSold from 2007 - 2021

Connecting to a mixer | L1™ Model II system

To connect an L1 model II system to a mixing board, follow these steps:

  1. Connect each instrument to the mixing board
  2. Set each channel's input trim and level to the desired level
  3. Connect the "Main Output" of the mixing board to the "Analog Input" of the L1 system
Note: The L1 model II system is mono, so be sure the mixing board is not sending a stereo signal.
Loading
Connecting to a mixer | L1™ Model II system