Was this article helpful?
Associating the expansion remote with the system | Lifestyle® 135 home entertainment system
Select the expansion remote being associated to the system
RC35S2
To pair the RC35S2 expansion remote and control console, follow these steps:
There are two methods to pairing the expansion remote; one pairs the remote using the System Information screen, the other navigates through the Unify menu screens
Using the System Information screen:
Using the System Information screen:
- On the control console, press Setup. The Setup menu with the Unify logo should appear on the TV screen - if it doesn't, select the correct TV input
- Press and hold Setup until the System Information Screen displays
- Change switches 1, 2, 3 and 4 under the battery cover on the back of the expansion remote to match the four lines shown to the right of the number on line 11. If six lines are shown, change switches 5 and 6 as well
- On the control console, press Setup. The Setup menu with the Unify logo should appear on the TV screen - if it doesn't, select the correct TV input
- On the main remote, press Down until "Homewide" is highlighted
- Press OK
- Press Up or Down to highlight "House code"
- Press OK
- Press Up or Down to highlight "Standard". The default is "15". Changing this selection will change the house code setting to "0" for Standard, "0A" for Alternative
- On the expansion remote, press Stop. The system's house code setting will change to match the expansion remote
- On the main remote, press Exit to leave the menu
PMCIII
To pair the PMCIII expansion remote and control console, follow these steps:
There are two methods to pairing the expansion remote; one pairs the remote using the System Information screen, the other navigates through the Unify menu screens
Using the System Information screen:
Using the System Information screen:
- On the control console, press Setup. The Setup menu with the Unify logo should appear on the TV screen - if it doesn't, select the correct TV input
- Press and hold Setup until the System Information Screen displays
- On the PMCIII, press Setup
- Tip the center bar down until "House Code" is highlighted
- Push the center bar in
- Tip the center bar up or down until the number highlighted matches the House Code number shown on line 11 of the System Information Screen
- Press Setup on the PMCIII to exit the setup screen
- On the control console, press Setup to exit the System Information Screen
- On the control console, press Setup. The Setup menu with the Unify logo should appear on the TV screen - if it doesn't, select the correct TV input
- On the main remote, press Down until "Homewide" is highlighted
- Press OK
- Press Up or Down to highlight "House code"
- Press OK
- Press Up or Down to highlight "Standard". The default is "15". Changing this selection will change the house code setting to "0" for Standard, "0A" for Alternative
- On the PMCIII, press Stop. The system's house code setting will change to match the expansion remote
- On the main remote, press Exit to leave the menu
.png)
