Loading
Setting ADAPTiQ A/B | Lifestyle® 235 home entertainment system
lifestyle®-235-home-entertainment-system
Lifestyle® 235 home entertainment systemSold from 2010 - 2013

Setting ADAPTiQ A/B | Lifestyle® 235 home entertainment system

To toggle ADAPTiQ functionality, follow these steps:

  1. Verify that the console software is 01.06.00 or greater, the remote software is 01.04.00 or greater and that ADAPTiQ has been run. For information, see Checking the software or firmware version
  2. On the remote, press and hold both the Menu and Exit buttons at the same time for 5 seconds. Once this has been done, ADAPTiQ will change to the opposite state
There will not be any tone, LED blink pattern or on-screen message to indicate the change. Also, the ADAPTiQ - Enable/disable selection within the Setup menu will not properly indicate whether the feature is enabled or disabled. Only selecting "Yes" when asked to enable or disable the feature will correctly indicate whether ADAPTiQ is on or off.
Loading
Setting ADAPTiQ A/B | Lifestyle® 235 home entertainment system