Loading
Lifestyle® 235 home entertainment system | Setting ADAPTiQ A/B
lifestyle®-235-home-entertainment-system
Système de cinéma maison Lifestyle® 235Vendu entre 2010 - 2013

Lifestyle® 235 home entertainment system | Setting ADAPTiQ A/B

To toggle ADAPTiQ functionality, follow these steps:

  1. Verify that the console software is 01.06.00 or greater, the remote software is 01.04.00 or greater and that ADAPTiQ has been run. For information, see Checking the software or firmware version
  2. On the remote, press and hold both the Menu and Exit buttons at the same time for 5 seconds. Once this has been done, ADAPTiQ will change to the opposite state
There will not be any tone, LED blink pattern or on-screen message to indicate the change. Also, the ADAPTiQ - Enable/disable selection within the Setup menu will not properly indicate whether the feature is enabled or disabled. Only selecting "Yes" when asked to enable or disable the feature will correctly indicate whether ADAPTiQ is on or off.

Cette information est-elle utile?

OUI
NON
COMMENCER LA RÉPARATION OU LE REMPLACEMENT
Chargement
Lifestyle® 235 home entertainment system | Setting ADAPTiQ A/B