Loading
Understanding LED indicator status lights and information | Lifestyle® SoundTouch® 135 entertainment system
lifestyle®-soundtouch®-135-entertainment-system
Lifestyle® SoundTouch® 135 entertainment systemSold from 2015 - 2016

Understanding LED indicator status lights and information | Lifestyle® SoundTouch® 135 entertainment system

Control Console LED Status Indicator

\"Light

LED State: Off

Description: System is off

\"Solid

LED State: Solid Red

Description: System is in network standby mode

\"Blinking

LED State: Blinking Green

Description: System is starting up

\"Solid

LED State: Solid Green

Description: System is ready to use

\"Solid

LED State: Solid Amber

Description: System is powering down, or system is off and charging an iPod

SoundTouch Wireless Adapter LED Status Indicator

\"Back
\"LED

Off

LED State: Off

Description: The adapter is unpowered, connected via Ethernet or the network is disabled

\"LED

LED State: White (blinking fast)

Description: The adapter is attempting to connect to a Wi-Fi network

\"LED

LED State: White (slow flash)

Description: The adapter is downloading a firmware update

\"LED

LED State: White

Description: The adapter is connected to a Wi-Fi network

\"LED

LED State: White (solid 3 sec, double-flash, repeat)

Description: The adapter is installing a firmware update

\"LED

LED State: Amber (blinking)

Description: The adapter failed to connect to Wi-Fi / network error

\"LED

LED State: Amber (blinking fast)

Description: The adapter has a firmware error

\"LED

LED State: Amber (solid)

Description: The adapter is in setup mode broadcasting its \"Bose SoundTouch Wi-Fi Network\"

Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.

Speaker Array LED Status Indicator

LED State Description
Off\"\"Speaker array and Acoustimass module are connected
Slow Blinking Orange\"\"Speaker array is available to make a wireless connection
Fast Blinking Orange\"\"Speaker array is disconnected and trying to connect
Solid Green\"\"ADAPTiQ system is running
Blinking Green\"\"ADAPTiQ system is calculating data
Solid Red\"\"System error or Acoustimass module connection issue

Acoustimass Module LED Status Indicator

LED State Description
Solid Orange\"\"Speaker array and Acoustimass module are connected
Blinking Orange
(every 3 seconds)
\"\"Acoustimass module is disconnected from speaker array
(or speaker array is off: Acoustimass module standby)
Slow Blinking Orange\"\"Acoustimass module is available to make wireless connection
Solid Red\"\"System error

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Understanding LED indicator status lights and information | Lifestyle® SoundTouch® 135 entertainment system