Was this helpful?
Changing house code settings | Lifestyle® V25 home entertainment system
To change the expansion house code, follow these steps:
- Remove the battery cover from the back of the expansion remote and locate the nine switches above the battery compartment
- Change the position of any of the first four switches using a push pin, paper clip or pen
- Replace the battery cover
- Hold the remote near the control console
- Turn the TV on
- Select the TV video input that connects to the system
- On the Control console, press Setup
- On the main remote, press Up or Down to highlight "Homewide"
- Press OK
- Press Up or Down to highlight "House code"
- Press OK
- On the expansion remote, press Stop. The system's house code setting will change to match the expansion remote
- On the main remote, press Exit to leave the menu
To toggle between Standard and Alternative follow the directions above to get to the “House code” screen. Once there press and hold the MORE button for three seconds. “Standard” and “Alternative” will now be a selectable option on the screen. Toggling between them will reset the house code back to settings of "0" for Standard or "0A" for Alternative. It should be noted that switching between “Standard” and “Alternative” should only be used by installers or those working in hospitality.
.png)
