Loading
Using Recovery mode | Bose Music Amplifier
bose-music-amplifier
Bose Music AmplifierSold from 2022

Using Recovery mode | Bose Music Amplifier

To enter Recovery mode:

  1. Disconnect the amplifier from power and wait 30 seconds.
  2. On the back of the amplifier, press and hold the Reset button.
  3. While holding the Reset button, reconnect the amplifier to power.
  4. Wait one second then release the Reset button.

Things to know about this process

  • The status light on the back of the amplifier will blink an alternating red-and-white pattern to indicate the speaker has entered recovery mode. The amplifier will then try to download and install the latest update. The LED will slowly blink white while downloading the update and then quickly blink white while installing it. This can take several minutes (often around 20 minutes). When the status light turns off, open the Bose app and add the amplifier to your account.
  • If a red light appears, the amplifier needs service.
Loading
Using Recovery mode | Bose Music Amplifier