Was this helpful?
Microphone does not pick up sound | OE2 audio headphones
Select how the device is connected:
Using a wired connection
Remove and reseat the audio cable in the connected device.
On the connected device, disconnect the cable that connects your headset. Then, reconnect it to be sure it is fully connected and secure. (Tip: While connected, if you rotate the plug in the jack and hear crackling or intermittent sound, there might be debris or an issue with a contact inside the jack.)
Check the condition of the audio plug on your product.
If the audio connector on your product is broken, frayed or damaged, it might not play audio as expected. If it is damaged, your product may need service. Follow the link for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Check the condition of the headphone cable.
If the plug or any part of the cable is damaged, replace the headphone cable.
Reboot the connected device.
Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.
Check that the headphone jack is clean and free of debris.
Use a flashlight or other light source to check if any lint or debris has entered the headphone jack on the device, which can interfere with the connection.
.png)
