Was this helpful?
Power LED indicator flashing white and amber | Bose SoundLink Flex Portable Speaker (2nd Gen)
If your product has been in extreme hot or cold temperature, wait until it reaches room temperature.
If the battery temperature is beyond the operating temperature range your product will not turn on. Let it sit at room temperature for 30-60 minutes, then try again.
Check for and install any available product updates.
For more info, see Checking the software or firmware version and Updating the software or firmware of your product.
Reset the SoundLink Flex Speaker
If the speaker is powered on or becomes unresponsive, you can reset it.
Resetting the speaker resets the product controls and reboots the speaker. It doesn’t clear any device settings.
NOTE: Make sure the USB-C cable isn’t connected to the speaker.
Resetting the speaker resets the product controls and reboots the speaker. It doesn’t clear any device settings.
NOTE: Make sure the USB-C cable isn’t connected to the speaker.
- Press and hold the Power button
for 15 seconds until the speaker powers off.
- The speaker will automatically reboot.