Was this helpful?
Answer/End button works intermittently or has unexpected functionality | Custom QC®15 noise cancelling headphones
Not all functions in all applications are supported.
The Volume and Answer/End buttons were designed specifically to work with iPhone and core Apple applications. Third party applications and non-Apple products may have no or limited functionality.
Reboot the connected device.
Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.
Verify that a button on the phone is not being pressed.
Some phones have external buttons or touch screens that may be activated while being handled or while in your pocket. Verify that this issue is related to the answer/end button on the headset and not a button on the phone being pressed
Be sure that the answer/end button is pressed in the center and not off axis.
| Call Related Functions | |
|---|---|
| Action | Usage |
| Answer a call | Press and release |
| End a call | Press and release |
| Decline an incoming call | Press, hold for 2 seconds and release |
| Switch to an incoming or on-hold call and put the current call on hold | Press and release to switch to incoming call. Press and release again to switch back to the first call |
| Switch to an incoming or on-hold call and end the current call | Press, hold for 2 seconds and release |
| Use Voice Control | Press and hold the Answer/End button. See phone's User Guide for compatibility and usage information about this feature |
| Media Playback Functions | |
|---|---|
| Action | Usage |
| Play or pause a song or video | Press and release |
| Skip to the next song or chapter | Press and release twice quickly |
| Fast-forward | Press and release twice quickly and hold the second press |
| Go to the previous song or chapter | Press and release three times quickly Note: Function not supported on all Android devices |
| Rewind | Press and release three times quickly and hold the third press Note: Function not supported on all Android devices |
Note: The answer end button also houses the microphone and volume buttons.
Check that the headphone jack is clean and free of debris.
Use a flashlight or other light source to check if any lint or debris has entered the headphone jack on the device, which can interfere with the connection.
Be sure the buttons on your product are not stuck.
When you push a button on your product, you should feel it depress. When you release the button, it should snap back to its original position. If it does not, it may be stuck. Check for and clean any debris around the button.
Remove the connected device from any case or protective sleeve.
A case or sleeve may prevent the audio cable from seating properly into the headphone jack. If using a case, remove it and try again.
Remove and reseat the audio cable in the connected device.
On the connected device, disconnect the cable that connects to your headset then reconnect it to be sure it is fully connected and secure. If you rotate the plug in the jack and hear crackling or intermittent sound, there might be debris inside the jack or on the headphone plug.
If connected, bypass any adapters or extension cables.
If your product connects to the device using an extension cable or adapter, disconnect the extension cable or adapter to determine if the issue is related to it.
Make sure the device is compatible with the headset.
Some devices are not compatible. See
Compatibility Guide.
Check the condition of the headphone cable.
If the plug or any part of the cable is damaged, replace the headphone cable.
.png)
