Was this article helpful?
Touch control not working | Bose QuietComfort® Earbuds (2020)
Reset your earbuds.
This reset will clear the earbuds memory of previously-connected Bluetooth® devices. It does not restore the factory settings of your earbuds.
- Connect the charging case to power.
- Place the earbuds in the charging case.
- Close the charging case lid for 5 seconds, then open the lid.
- In the charging case, press and hold the Bluetooth button for 30 seconds, then release it: The earbud LEDs blink, glow solid white, and then blink blue.
- On the device that was previously connected to your earbuds, go to the Bluetooth menu and, in the list of remembered connections, remove your earbuds.
- Reconnect your earbuds to the device. For more info, see Connecting a Bluetooth® device .
Make sure your finger is making good contact with the touch control surface
- For multi-tap functions, vary the tap pressure
- Make sure your fingers are dry
- If your hair is wet, make sure it isn’t interfering with the touch surface
- If wearing gloves, remove them before touching the touch control surface
Keep your product within 33 feet (10 meters) of your personal device.
Distance and obstacles like walls, doors, or other electronics can weaken the Bluetooth signal. If you're having trouble, try moving your personal device and product closer together or relocating other devices that may cause interference.
.png)
