Was this article helpful?
Resetting your product | Lifestyle® 235 series II home entertainment system
Resetting your system
A reset corrects minor errors. Unless indicated otherwise, product settings are not lost during a reset.
What part would you like to reset?
The System
- Turn the system off. Wait 30 seconds.
- Unplug the control console power cord from the power outlet.
- Unplug the audio input cable from the control console.
- Unplug the Acoustimass module power cord from the power outlet.
- Unplug the audio input cable from the Acoustimass module. Wait 30 seconds.
- Reconnect the audio input cable to the Acoustimass module.
- Reconnect the audio input cable to the control console.
- Reconnect the Acoustimass module power cord.
- Reconnect the control console power cord.
- Retest the system.
The Console
- Turn the control console off.
- On the control console, press and hold Power for five seconds. The red LED will turn off.
- Release the Power button.
- Retest the system.
Note: It is not necessary to remove the power cord or any connected SoundTouch Wireless Adapter from the control console.
The SoundTouch Adapter Accessory (if applicable)
SoundTouch settings are not lost during a reset.
- On the back of the system console, disconnect the SoundTouch adapter from the Bose link and USB jacks.
- Wait 1 minute, then reconnect the adapter.
- Once the light glows solid on the adapter, resume normal use.
Advanced Troubleshooting
If the standard reset does not resolve your issue, try the Factory Reset/Default
Restore Factory Settings
This resets your product to its factory default configuration. Unless indicated otherwise, all settings are cleared and reverted to their original out-of-box state. After, your product can be configured as if it were being setup for the first time.
Restoring factory defaults only affects Settings menu options.
When factory settings are restored on your system, only the Settings menu options are affected:
- Center and surround speaker levels
- Speaker mode
- Audio processing settings
Note: System menu options—such as remote codes and video format settings—are not affected.
- On the remote control, press the System button.
Tip: If the system menu does not appear on your TV, ensure the correct TV input is selected. - Scroll right to select Media Center, then press the Enter button.
- Scroll down to select Restore Settings, then press the Enter button.
- Scroll up to select Yes, then press the Enter button.
The display shows: Have you been instructed to do this? - Scroll left to select Yes, then press the Enter button.
- Press the Exit button to exit the menu.
.png)
