Was this helpful?
Resetting your product | SoundTouch® 300 soundbar
To reset your soundbar:
- Turn off the soundbar.
- Disconnect the power cord from the soundbar or power outlet.
- If an accessory bass module or surround speakers are connected, disconnect the power cords for them also.
Tip: If accessory surround speakers are connected, disconnect power from both surround speaker receivers. - After 30 seconds, reconnect power to the soundbar.
- Wait about 30 seconds for the soundbar to reboot.
- If you disconnected power cords from an accessory bass module or surround speakers in step 3, reconnect them.
Restore the factory default settings.
Note: This reset erases all settings and returns your product to its default out-of-box state. Once reset, open the SoundTouch app to reconfigure your product.
- On the remote control, press the SoundTouch button
- Press and hold the Teletext button (to the right of the CC button) for 10 seconds until the lights on the soundbar blink white
- Wait for the soundbar to reboot. Once complete, the Wi-Fi light glows amber.
.png)
