Loading
Bose Frames Rondo | Replacing your lenses
bose-frames-rondo
Bose Frames RondoSold from 2019 - 2022

Bose Frames Rondo | Replacing your lenses

Before you begin:

We recommend using the included cloth when touching the lens to avoid scratches. Place a towel on a sturdy surface in case you accidentally drop a lens.

IMPORTANT: Only the following Frames have been tested and approved for prescription lenses in all regions globally:
  • Tempo
  • Tenor
  • Soprano

Replacing the lenses:

Removing lenses

  1. Place a towel on a sturdy surface in case you accidentally drop a lens
  2. To remove a lens, hold the Frames so they face away from you
  3. Place your thumbs in the bottom corner closest to the bridge
  4. Press firmly until the entire lens pops out from the frames
    Note: The lenses are made to be replaced, and some pressure is required to remove them.

Inserting lenes

  1. To replace a lens, hold the Frames so they face you
  2. Remove the lenses from the packaging, making note which is the left lens and which is the right lens
  3. Insert the a lens to the appropriate side of the Frames, then apply pressure in this order:
    1. Start with the top corner closest to the bridge
    2. Proceed to the other top corner
    3. Press the corner below that
    4. Press the bottom corner closest to the bridge

To clean the lenses, wipe them softly with the microfiber cloth bag.

Was this helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Need Help?
Need further assistance? We’re here to help.
Loading
Bose Frames Rondo | Replacing your lenses