Was this helpful?
Too much bass or too little treble from product | Bose S1 Pro+ Portable Bluetooth Speaker System
Is the T1 ToneMatch mixer connected?
Yes
If using a mixer, check the mixer EQ or effects processing settings.
On the mixer, try setting the EQ to the middle / nuetral position, then adjust the EQ as needed. Also, if the mixer has effects (e.g. compression, limiting, reverb, etc.), try disabling them then add them back one-by-by to determine if the issue is related to a particular effect.
Replace the input cables.
Try different input cables using the same source and same channel. If this solves the problem, the original cables may be defective.
Plug in a different audio source.
Connected a different audio source to determine if the issue is related to the source: If audio is being sent to your system from a a microphone, try a different microphone; if an instrument is connected, try a different instrument.
Reset your product.
To reset your product, power it off and disconnect the power cord for 30 seconds.
No
If using an external mixer, try adjusting the channel and/or master EQ controls.
If the issue is with audio sources plugged in to a mixer that is connected to your system, try adjusting channel or master EQ on the mixer. If the EQ is not set properly (i.e. too high or too low), it can affect how sound is heard from your system.
Reset your product.
To reset your product, power it off and disconnect the power cord for 30 seconds.
When playing bass-heavy audio at high volume, use a high pass filter.
When playing loud audio with a lot of low frequencies, bass port noise (broken/distorted sound) may be heard from the system. In such situations, adding a high-pass filter with 24-48 dB reduction at 70 Hz is recommended to lessen the bass processed by the system.
.png)
