Loading
SoundLink® around-ear headphones | Replacing the ear cushions
soundlink®-around-ear-headphones
SoundLink® around-ear headphonesSold from 2013 - 2015

SoundLink® around-ear headphones | Replacing the ear cushions

Snap the edges of the earcup cushions on to the earcups.

On the inside rim of the earcup, there are small tabs. Slide the edges of the earcup cushions under each of these tabs, then press all the way around the edges to snap the cushions in place.

Pulling off the ear cushions Putting on the ear cushions

To remove and replace ear cushions:

  1. Disconnect the Bluetooth® module from the earcup
  2. Grasp a side of the ear cushion and pull it up and outward to remove it. (Tip: Do not remove the material that covers the speaker)
  3. On the back of the ear cushion, fit the mounting flange inside the rim of the earcup
  4. Gently push on the edges of cushion to snap it into place.

There is a Youtube video for these instructions.



Direct Link: http://youtu.be/wWfy0-Rt6EM
Loading
SoundLink® around-ear headphones | Replacing the ear cushions