Was this helpful?
Removing and replacing the cover | SoundLink® Bluetooth® Mobile speaker II
Attaching or removing the cover.
To remove the cover:
- Using the 2.5 mm hex wrench supplied with the replacement battery, remove the two screws at the bottom of the speaker
- Push up on the back of the cover until it slides up slightly
- Pull the cover up and away from the speaker back
- Align the holes inside the cover with the anchor posts on the back of the speaker, and press the cover into place
- Slide the cover down on the anchor screws until it stops
- Replace and tighten the screws in the bottom of the cover