Loading
Replacing the battery in your product | SoundLink® Bluetooth® Mobile speaker II
soundlink®-bluetooth®-mobile-speaker-ii
SoundLink® Bluetooth® Mobile speaker IISold from 2012 - 2015

Replacing the battery in your product | SoundLink® Bluetooth® Mobile speaker II

Attaching or removing the battery

To remove the battery:
  1. Using the 2.5 mm hex wrench supplied with the replacement battery, remove the two screws at the bottom of the speaker

    Removing two screws at bottom of speaker
  2. Push up on the back of the cover until it slides up slightly

    Push up on back of cover
  3. Pull the cover up and away from the speaker back

    Pull cover up and away
  4. Using the 2.5 mm hex wrench, remove the two screws securing the battery (located near the bottom of the speaker)

    Removing the two screws securing the battery
  5. Pull the battery straight out of the speaker

    Removing the battery
To attach the battery:
  1. Replace the screws in the battery and tighten with the 2.5 mm hex wrench

    Inserting battery and tightening screws
  2. Align the holes inside the cover with the anchor posts on the back of the speaker, and press the cover into place

    Aligning the holes inside the cover with the anchor posts
  3. Slide the cover down on the anchor screws until it stops

    Sliding on cover until it stops
  4. Replace and tighten the screws in the bottom of the cover

    Tightening the screws on cover bottom
Loading
Replacing the battery in your product | SoundLink® Bluetooth® Mobile speaker II