Loading
Removing and replacing the cover | SoundLink® Wireless Mobile speaker
soundlink®-wireless-mobile-speaker
SoundLink® Wireless Mobile speakerSold from 2011 - 2014

Removing and replacing the cover | SoundLink® Wireless Mobile speaker

Attaching or removing the cover.

To remove the cover:
  1. Using the 2.5 mm hex wrench supplied with the replacement battery, remove the two screws at the bottom of the speaker


  2. Push up on the back of the cover until it slides up slightly


  3. Pull the cover up and away from the speaker back


To attach the cover:
  1. Align the holes inside the cover with the anchor posts on the back of the speaker, and press the cover into place


  2. Slide the cover down on the anchor screws until it stops


  3. Replace and tighten the screws in the bottom of the cover


Loading
Removing and replacing the cover | SoundLink® Wireless Mobile speaker