Was this helpful?
Understanding LED indicator status lights and information | SoundLink® Wireless Mobile speaker
SoundLink Mobile LED Status Indicators
Battery Indicator (when checking battery status)
| Color | Indicates |
|---|---|
| Green | 70% or more of full charge |
| Yellow | 20% to 70% of full charge |
| Red | 20% or less (charging needed). If the battery LED is flashing red when not checking the battery, see Battery light is quickly blinking red |
Battery Indicator (while charging)
| Color | Indicates | Details |
|---|---|---|
| Yellow | Battery is Charging | The color of the LED will remain yellow until the battery reaches 100%. Once at 100% the LED will turn off (not turn green) and the system will stop charging so there is no risk of overcharging. |
| Off | Charging Cycle Done | Once the battery reaches 100% the system will stop charging and the LED will turn off. If the system remains connected to AC power and the battery drains to about 80% charge the system will start to charge the battery again (yellow LED will turn back on). This helps preserve battery life by minimizing charge cycles and will continue until AC is disconnected. |
Battery Indicator (when in use)
| Color | Pattern | Indicates |
|---|---|---|
| Yellow | Very Fast Flash (4 times second) | System thinks battery temperature is outside of -20°C to +65°C range and has disabled all functionality for safety/reliability reasons. |
| Yellow | Fast Flash (2 times second) | The battery is in pre-charge mode (will stop and go solid after a short time) or that the battery pack is either too hot or cold to charge (outside 0°C - 45°C). |
SoundLink Wireless Mobile Speaker LED Status Indicators
| Bluetooth® LED State | Description | Indicates |
|---|---|---|
| Off | Wireless source is not selected | |
| On | Wireless source is connected | |
| Fast Flashing | Flashes on and off twice every second | Wireless source is connecting |
| Slow Flashing | Flashes on and off once every three seconds | Wireless source is not connected and system is available to connect to a previously paired device |
| Slow Pulsing | Fades on and off once every second | System is in discovery mode and waiting for a signal |
To check the battery status, see Checking the remaining battery charge
If all three white LEDs are lit at the same time see, All LEDs are lit at the same time
If the battery LED is flashing red when not checking the battery, see Battery light is quickly blinking red
If the battery LED is solid red all the time, see Battery light is always red
If the battery LED is solid yellow for longer than 10 hours while charging, see Battery LED is solid yellow after charging for an extended period of time
.png)
