Loading
Removing and replacing the cover | SoundWear™ Companion® speaker
soundwear™-companion®-speaker
SoundWear Companion speakerSold from 2017 - 2020

Removing and replacing the cover | SoundWear™ Companion® speaker

Removing the cover

  1. Unzip the cover

    \"Unzipping
  2. Bend the ends of the speaker outward to flatten the speaker and pull it away from the cover

    Note: While your speaker is flexible and can bend horizontally, do NOT bend your speaker so that it folds back onto itself. Minimize excessive bending.

    \"Taking
  3. Bend the ends of the speaker inward and remove the tips of the speaker from the cover

    \"Putting

Replacing the cover

  1. Anchor the tips of the speaker into the ends of the cover

    \"Putting
  2. Bend outward on the ends while pushing inward on the speaker to flatten and fit it into the cover

    Note: While your speaker is flexible and can bend horizontally, do NOT bend your speaker so that it folds back onto itself. Minimize excessive bending.

    \"Flexing
  3. Pull the cover over the speaker and zip it closed

    \"Pulling

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Removing and replacing the cover | SoundWear™ Companion® speaker