Loading
Bose Solo TV Speaker | Accessing and using Diagnostic Mode
bose-solo-tv-speaker
Système audio TV Bose® Solo remis à neufVendu entre 2012 - 2015

Bose Solo TV Speaker | Accessing and using Diagnostic Mode

To enter diagnostic mode:

With the system on, press and hold the on/off button on the remote for 10 seconds. The LED on the system will blink repeatedly while the button is held. After 10 seconds, release the button and note the system LED blink pattern, which will continually repeat until the power button is pressed, (Note: If the LED goes out, the system did not receive the signal from the remote for the full 10 seconds.)
  • The LED alternates red and green quickly: audio signal detected
  • The LED blinks red quickly: no audio signal detected
  • The LED is solid red: digital zeros received

Cette information est-elle utile?

OUI
NON
COMMENCER LA RÉPARATION OU LE REMPLACEMENT
Chargement
Bose Solo TV Speaker | Accessing and using Diagnostic Mode