Programming your remote | Bose Solo TV Speaker

1. In the remote code booklet, find the codes for the brand of your device
   Tip: If you need the code booklet, search for and select your product at bose.com/support, then click the Downloads tab
2. On the remote control, press and hold the Setup button until all five source buttons light
3. Press the source button for the device you want to control (i.e. TV or CBL-SAT) so only it remains lit
4. Enter the first code for the brand
   Tip: The source button blinks twice to confirm. If all source buttons blink five times, an incorrect code was entered
5. Test the code. If it does not control your device or has limited functionality, repeat these steps with the next code for the brand.

Here are some tips:

• Some brands have many devices, so you might need to try several codes to find one that works
• If the source button on your remote turns off, it is not in programming mode. Start the programming process again
• While your univeral remote can control many devices, it might not be able to control or fully control all devices

To program your remote:

1. In the remote control code booklet, find the code for the brand you want to control
   Tip: If you need the code booklet, search for and select your product at bose.com/support, then click the Downloads tab
2. On your remote, press and hold the source button of the device you want to control (i.e. TV or CBL-SAT) until all six source buttons glow
3. Release the button so only the button you held glows
4. Enter the code for the device brand, then press the Vol+ button.
   Tip: If all six source buttons blink three times, an invalid code was entered. Try again
5. Check if the remote controls the device:
   • For TVs, try the Channel buttons, then press MENU and try browsing with the Arrow buttons
   • For cable/satellite boxes, press the GUIDE button and try browsing with the Arrow buttons
   • For DVD/Bu-ray players, press the MENU or GUIDE button and try browsing with the Arrow buttons
   • For game systems, try browsing with the Arrow buttons
6. If the code works, press EXIT to save your settings
7. If the code does not work, press VOL+ to select the next code for the brand, then repeat step 5
   Tip: If the six source buttons on your remote blink three times, there are no additional codes for the brand.