Loading
Bose® Solo 10 TV sound system | Accessing and using Diagnostic Mode
bose-solo-15-tv-sound-system
Système audio TV Bose Solo 15Vendu entre 2014 - 2015

Bose® Solo 10 TV sound system | Accessing and using Diagnostic Mode

To enter diagnostic mode:

With the system on, press and hold the Mute button on the remote for 6 seconds. (Note: The system LED flashes after 3 seconds indicating Dialog Mode on/off; continue holding mute for an additional 3 seconds until the LED changes again, indicating Diagnostic Mode.) Release the button and determine the LED blink pattern.
  • The LED blinked alternately red and green quickly: audio signal detected
  • The LED blinked red quickly: no audio signal detected
  • The LED is solid red: digital zeros received

Cette information est-elle utile?

OUI
NON
COMMENCER LA RÉPARATION OU LE REMPLACEMENT
Chargement
Bose® Solo 10 TV sound system | Accessing and using Diagnostic Mode