Loading
Creating or separating a stereo pair | SoundTouch® 10 wireless speaker
soundtouch®-10-wireless-speaker
SoundTouch® 10 wireless speakerSold from 2015 - 2020

Creating or separating a stereo pair | SoundTouch® 10 wireless speaker

Creating a stereo pair:

  • Stereo pairs cannot be created without an active internet connection
  • SoundTouch and Bluetooth® streaming is available for stereo pairs
  • Rebroadcasting AUX IN was not supported for stereo pairs initially, but was added in firmware v17.0.8. Ensure your product is up to date.
  • Only one paired speaker receives remote commands. This prevents conflicting commands since paired speakers are typically placed where both speakers can detect remote command simultaneously
To create a stereo pair:
  1. In the SoundTouch app, select the system in the device tray at the bottom

    SoundTouch app device tray at bottom
  2. In the system panel, select Settings (gear icon) to open the Speaker Details

    SoundTouch app system panel
  3. Select "CREATE STEREO PAIR"

    SoundTouch app Speaker Details screen
  4. Select "CONTINUE"

    SoundTouch app creating a stereo pair
  5. Select the system to be the left speaker, then select "CONTINUE." The left speaker plays a tone to confirm

    SoundTouch app select left speaker SoundTouch app confirm left speaker
  6. Select the system to be the right speaker, then select "CONTINUE." The right speaker plays a tone to confirm

    SoundTouch app select right speaker SoundTouch app confirm right speaker
  7. Enter a name for the pair (or leave the name unchanged), then select "CONTINUE." Both speakers play a tone to confirm setup

    SoundTouch app naming stereo pair SoundTouch app naming stereo pair
The pair can now be selected in the system tray. Left channel audio will play through the designated left speaker and right channel audio will play through the designated right speaker.

Separating a stereo pair:

  1. In the SoundTouch app, select the stereo pair in the device tray
  2. In the paired system panel, choose the settings gear icon to open the Speaker Details for the pair

    SoundTouch app screen showing 2 SoundTouch 10 speakers

  • Choose "SEPARATE PAIR"

    SoundTouch app screen highlighting separate stereo pair button

  • Choose "CONTINUE" to confirm

    SoundTouch app screen highlighting continue button

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Need Help?
Need further assistance? We’re here to help.
Loading
Creating or separating a stereo pair | SoundTouch® 10 wireless speaker