Loading
Resetting your product | SoundTouch® Stereo JC Wi-Fi® music system
soundtouch®-stereo-jc-wi-fi®-music-system
SoundTouch® Stereo JC systemSold from 2014 - 2014

Resetting your product | SoundTouch® Stereo JC Wi-Fi® music system

Do you want to reset your product or restore its default settings?

Reset

Reset your Acoustimass module by following these steps:

  1. Turn the system off
  2. Unplug the Acoustimass module power cord from the power outlet
  3. Unplug the wireless adapter from the Acoustimass module.
  4. Wait 30 seconds
  5. Reconnect the wireless adapter to the Acoustimass module
  6. Reconnect the Acoustimass module power cord
Restore factory settings

To restore the factory default settings of the SoundTouch adapter:

Note: This reset erases all settings and returns your product to its default out-of-box state. Once reset, open the SoundTouch app to reconfigure your product.
  1. Turn on your system
  2. On the back of the system console, disconnect the SoundTouch adapter from the Bose link and USB jacks
  3. If connected, disconnect the Ethernet cable from the adapter
  4. On the back of the adapter, press and hold the Control button and, while holding it, reconnect the Bose link cable to the console
  5. When the light on the pedestal begins blinking white (about five seconds), release the Control button
  6. Reconnect the USB cable to the console
  7. Wait until the light on the adapter is solid amber. (Note: While resetting, the light will change colors and blink patterns for up to 4 minutes)
  8. If previously connected, reconnect the Ethernet cable

To restore the factory default settings:

Note: With the exception of the ADAPTiQ audio calibration settings, this reset erases all settings and returns your system to its default out-of-box state.
  1. Power off your system.
  2. On the back of the system console, disconnect the power cord.
  3. On the front of the system console, simultaneously press and hold the Source and the Volume - buttons and, while holding them, reconnect the power cord.
  4. Continue holding the buttons until the Bose logo appears twice on the TV screen.
  5. Re-pair the remote control with your system. For more info, see Pairing the remote control to your system.

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT
Loading
Resetting your product | SoundTouch® Stereo JC Wi-Fi® music system